显示标签为“tableware vacuum coater”的博文。显示所有博文
显示标签为“tableware vacuum coater”的博文。显示所有博文

2016年12月29日星期四

Principle of rf sputtering coating machine

Principle of rf sputtering coating machine
Exterior burnish products, in fact, most of them are used the surface treatment, and said to the surface treatment, now of the coating is one of the typical type of surface treatment. And this kind of surface treatment of the main characteristic is that after coating makes the product's surface is covered with a layer of thin film and have the function of the isolated from the outside factors influenc...e its surface. And the other is generally after coating, the surface has a certain iuster, for the products, improve the appeal. Now, use a lot of coating machinery, including the control sputtering coating machine, vacuum evaporation equipment, to introduce below the peak sputtering coating machine.
Vacuum coating machine in a vacuum chamber, applying frequency to set two plates and in more than 50 kh high-frequency electric, is a small amount of electrons in the high frequency electric field in the high frequency electric field under the action of accelerating, collide with gas molecules, make gas ionization and emitted electron, the electronic and high frequency electric field will be accelerated, eventually forming the high frequency glow discharge. Radio frequency glow discharge of glow there is no difference between the two electrodes, each with a cathode dark space and negative hui district, plasma column between the two poles. Input coupling mode of high frequency power supply mode with capacitive coupling and inductance coupling, which is currently an internal principle of splash control sputtering coating machine, also because this principle makes the sputtering coating machine to use stability.

2016年12月19日星期一

The characteristics and advantages of vacuum coating machine

The characteristics and advantages of vacuum coating machine
As the main vacuum equipment, at present in the surface treatment can play a good effect of vacuum coating machine is to use more kind, and this kind of equipment is not in the real operate under vacuum condition. Because true vacuum environment is still need very high conditions, need technology is also very high, at present is difficult to achieve in the machinery. Here said the vacuu...m mainly refers to the environment, relative to the vacuum and the vacuum coating equipment in such an environment, processing technology is used to analyse the articles needed in coating coating process.
Compared with the general surface treatment device, the mechanical plating advantage in where? It can form a layer of thin film on the surface of objects, and the film has some characteristics of the coating material. That is to say this kind of vacuum coating technology can make objects have a certain performance improvement, take plastic coated materials, for instance, by vacuum evaporation coating machine can make objects are after coating, has certain corrosion resistance properties, and on the surface of the membrane layer can also play a role wear-resisting, to protect the goods have some improvement.
This is the characteristics of this kind of coating equipment, as well as its main advantage, at present some of the metal objects or the lens material is using this kind of coating machine to surface treatment.

2016年11月16日星期三

Vacuum Metallurgy Development Direction

Vacuum Metallurgy Development Direction
1.Certain specific process of metallurgical which is suitable vacuum metallurgy technology can be used in place of vacuum metallurgy technology.
2.Development of a new vacuum metallurgical equipment.
3.The new method,new equipment and new processes of vacuum metallurgy certain materials research....
4. Vacuum metallurgical development of new materials.
5 .There exists a vacuum smelting slag under conditions (including remelting) technology development
6. Reseaching new special smelting technology or Development of widing the same specialty applications technology .
7. Numerical simulation and computer control of special metallurgical smelting process and quality control.
8. Production of zero inclusions ultrapure superalloys and specialty steel.

A.Mitchell put forward the concept of zero production of stainless steel and high-temperature alloy inclusions, not only theoretically demonstrated obtain zero inclusion of stainless steel, and believed that if you can avoid the original stainless steel ultrapure metals into CaO or CaO-containing inclusions and high-temperature alloys.

2016年9月26日星期一

Vacuum pump in the vacuum coating equipment

Vacuum pump in the vacuum coating equipment
Vacuum pump in the vacuum coating equipment, equipment operation will generate heat, if increase the hot conditions, such as the temperature increases, so the load of equipment will also increase, under this situation, how to maintain?
First: to prevent the vacuum pump or avoid vacuum pump is placed in the sun! As far as possible let the vacuum pump in a cool place, vacuum pump should pay attention to in the outdoor place cannot let vacuum pump exposure in the sun. Itself high vacuum pump temperature during work time, if it is difficult to heat, temperature vacuum pump increases, once reach zero boundary temperature of the vacuum pump, mechanical failure will occur!
The second: the vacuum pump in ventilated place or interior is equipped with cooling device can also be! Willing to also is same, just to let the vacuum pump cooling performance is better, the lower the temperature in the vacuum pump work as much as possible.
Third: material timely replacement. One of the most important is: oil and oil mist separator (exhaust filter)! These two kinds of material must be timely replacement. Exhaust filters if scrap or other quality problems when replacing the first time! Oil a color change color, sediment increase, began to appear the phenomenon such as emulsifying can't just stay in the refueling and maintenance, all want to replace the vacuum pump oil.
Fourth: before the hot weather of vacuum pump for a thorough cleaning and maintenance.
Fifth: the remaining matters needing attention of basically the same as regular maintenance.

2016年3月17日星期四

The development potential of vacuum plating equipment

   
  Vacuum plating equipment refers to a kind of need to be done under high vacuum coating, including vacuum ion evaporation, magnetron sputtering, MBE molecular beam epitaxy etc. A lot of kinds, but more common are two evaporation and sputtering. Evaporation coating is generally by heating target material to make the surface of target components form groups of atoms, or ions evaporate, make its settlement in the substrate surface, form a thin film through further film-forming process.
 For sputtering deposition, we can understand for the use of electronic or high-energy laser bombardment of target, and the surface components form groups of atoms, or ions was sputtering, and deposited on the substrate surface, through further film-forming process, eventually form a thin film. Two ways shall be carried out under the high vacuum environment, so called vacuum coating technology. Vacuum plating than traditional electroplating water, good development potential, the environmental pollution is small, low cost, make product metal sense is strong, high brightness, is widely used in various industries.