显示标签为“Evaporation vacuum coating machine”的博文。显示所有博文
显示标签为“Evaporation vacuum coating machine”的博文。显示所有博文

2016年12月19日星期一

The characteristics and advantages of vacuum coating machine

The characteristics and advantages of vacuum coating machine
As the main vacuum equipment, at present in the surface treatment can play a good effect of vacuum coating machine is to use more kind, and this kind of equipment is not in the real operate under vacuum condition. Because true vacuum environment is still need very high conditions, need technology is also very high, at present is difficult to achieve in the machinery. Here said the vacuu...m mainly refers to the environment, relative to the vacuum and the vacuum coating equipment in such an environment, processing technology is used to analyse the articles needed in coating coating process.
Compared with the general surface treatment device, the mechanical plating advantage in where? It can form a layer of thin film on the surface of objects, and the film has some characteristics of the coating material. That is to say this kind of vacuum coating technology can make objects have a certain performance improvement, take plastic coated materials, for instance, by vacuum evaporation coating machine can make objects are after coating, has certain corrosion resistance properties, and on the surface of the membrane layer can also play a role wear-resisting, to protect the goods have some improvement.
This is the characteristics of this kind of coating equipment, as well as its main advantage, at present some of the metal objects or the lens material is using this kind of coating machine to surface treatment.

2016年12月7日星期三

Works multi-arc ion plating machine and application description

Works multi-arc ion plating machine and application description
Multi-arc ion vacuum coating machine is an efficient, safe, pollution-free ion plating equipment, with deposition speed, ionization rate, ion energy, the equipment is simple, low cost, the advantages of producing a large quantity.
Ion plating fact ion sputtering, the conductive target, DC bias power supply; non-conductive targets, using pulsed bias supply. Some multi-arc ion coating machines, you may also need a DC arc or pulsed arc power supply. Bias power supply is in fact between the cathode and the anode position sample bias electric field where the formation is generally negative high voltage cathodes. Free electron emission cathode surface directional acceleration in the electric field emission electron impact gas molecules, so that the ionization, and the gas is expelled electrons are accelerated by the electric field of continuing ionized molecules of other gases, continuous form avalanche effect, hit the gas wear, the formation constant of ionization current. In this case ions are accelerated to bombard the target, the target material atoms expelled surface, and deposited on the sample surface.
Application of multi-arc ion coating machine, multi-arc ion coating machine for different grades of hardware products, general construction hardware, locks, multi-arc ion plating equipment capable, high-grade products such as strap, case, glasses , mobile phone shell, golf equipment, sanitary ware, jewelry, and other commonly used arc / IF (+ DC) magnetron sputtering composite coating equipment, the choice of the size of the models based on loading. The device can be plated gold color, rose gold, brown, brown, tan, blue and other decorative film.

2016年11月6日星期日

What is a vacuum coating machine?

What is a vacuum coating machine?

Vacuum coating machine mainly refers to a kind of need to be done under high vacuum coating, including many types, including vacuum ion evaporation, magnetron sputtering, MBE molecular beam epitaxy, PLD laser sputtering deposition and so on many kinds. The main idea is divided into evaporation and sputtering.
What is a vacuum coating machine? Light coating machine encountering such as to how to solve? Troubleshooting should detect low vacuum is normal (mechanical pump, roots pump, pipe, chamber, evaporator), the low vacuum is normal to open the main pump, main pump work in normal after testing chamber under vacuum is normal, normal to open the high valve chamber under vacuum is used to detect the high vacuum leak detection, vacuum until reach work, limit vacuum, vacuum, vacuum, such as the limit of vacuum and vacuum is normal, and restore the vacuum and vacuum does not work properly may be there is something wrong with the main pump. Now you to what is called vacuum coating machine should have a general understanding.

2016年10月24日星期一

What is the working principle of various coating way?

What is the working principle of various coating way?
What is the working principle of various coating way? In accordance with the coating for vacuum coating machine mainly can be divided into: evaporative deposition, ion plating and magnetron sputtering coating, so how do they work?
The formation of sputtering deposition technology is the use of vacuum glow discharge, accelerate the positive ions make its bombardment of sputtering target material surface phenomenon, make out the surface of the target material particle deposition to form a thin film to the substrate.
Working principle of evaporative coating is put membrane material in vacuum coating indoor, after evaporation source heating evaporation, when the evaporation molecular mean free path is greater than the linear dimensions of the vacuum coating chamber, the steam of atoms and molecules escape from the surface of the evaporation source, little impact of other molecules or atoms and the obstacles, can directly reach the plating surface of the substrate, due to the low substrate temperature, then condensation and film.
Tial principle is the use of vacuum arc discharge counts in the evaporation source technology, is the source of ignition under vacuum evaporation (cathode), and self sustaining formed between anode arc discharge, which emitted from the cathode arc light point cathode material of ions.
Vacuum coating machine company, points out that because of the current local concentration, lead to the joule heat to the cathode material partly ionization, such as explosive to bias in the work under the action of combined with the reaction gas, which is deposited on the workpiece surface is formed by plating layer.

2016年10月17日星期一

How to buy vacuum coating machine, it is necessary to pay attention to

How to buy vacuum coating machine, it is necessary to pay attention to
With the vigorous development of the vacuum coating industry, also more and more high to the requirement of vacuum coating machine, because the customer's products are constantly upgrading, all kinds of new product material appeared constantly, all kinds of coating requirements more and more complex, we now buy vacuum coating machine pay attention to the following three points:
First of all, the processing power of the vacuum coating machine shell Seemingly cases do not have what difficulty, every vacuum equipment factory can work, but a lot of knowledge, a device of light is not enough to have good vacuum system, vacuum chamber if processing is bad (such as welding), that this equipment to buy back to the customer will have a headache, processing of bad equipment often appear a few small leakage, pressure is not stable, and even some puzzling problems (such as stainless steel plating on titanium as long as more than 3 minutes in furnace into purple, no more than is normal, this is we meet client instance). So here we sincerely recommend our customers to buy the vacuum coating equipment as far as possible choose processing strength of the manufacturer (have) of machining center and other processing equipment.
Second vacuum system configuration as the saying goes, a penny a points goods, price and quality is actually a proportional to the relationship, even if is the same function of the equipment, different configuration, the price must be different, configured vacuum coating machine, long service life and easy to operate smoothly, but the low configuration equipment, problems, foibles, seriously affect the production schedule.
The last is not package process, don't buy equipment.
This is one of the most important among three o 'clock, because the core of the realization process is evaporating source (target) or electron gun, etc.), ready to evaporation source to develop the stability of the coating process, don't understand the process of manufacturer also do bad to evaporation source, good evaporation source is through continuously to improve to make all kinds of coating research, craft do bad evaporation source also do bad, so come to the conclusion that do bad evaporation source manufacturer all need not consider. Generally buy vacuum coating machine, therefore, must choose a proofing coating machine manufacturers, to take samples to plating, plating out samples can reach their testing requirements, in combination with the appeal two decision to buy or not. Equipment manufacturers must do a good job in the factory before the church your own equipment operators after the coating process and equipment factory warranty free coating process consultation and guidance.

2016年8月30日星期二

Evaporation coating operation and the effect of vacuum coating machine

Evaporation coating operation and the effect of vacuum coating machine
Now the vacuum evaporation coating machine is vacuum technology development of more mature since a production equipment, the machinery by electrified motor to a specific place within the location of the coating material for heating. Makes the material is heated evaporation can get after, and then through the evaporation of groups of atoms, or ions cover prepared substrate, forming, and make it slowly form a thin film form. Then removed substrate that enables the film to attach to the objects need to coating surface, forming a layer of thin film, after cooling, the film is gradually formed. This is at present in the form of the evaporation coating machine main approach, is also the most commonly used vacuum coating machine for machining method.
  Due to the application of vacuum coating machine is very widely, has penetrated into vehicles, civil engineering, mechanical, packaging, environmental protection, etc., so now the vacuum coating is the main form of surface treatment. Now on the surface of the vacuum machinery for processing can realize stable appearance packaging, it's the value for the object or very large, both to ensure that an object's surface has a certain luster, can guarantee the machine for coating play a protective effect of items.

2016年8月22日星期一

Evaporation vacuum coating machine

Evaporation vacuum coating machine
Reasonable configuration for the vacuum system. High pumping speed, high efficiency, energy saving, full automatic process controller can be simple, reliable, beautiful.
operational Principle :
The evaporation material (for example: Aluminum wire) vaporized and evaporated by high joule heat coming from high-resistance (heating elements), Vaporized aluminum material deposit on the surface of the substrate forming film.
product category:
ZF series evaporation vacuum coating machine including all kinds of the models ,for example:
Vertical single door type
Vertical double door type
Horizontal double door type
Square advertising board evaporation coating machine
Silicone oil protective film evaporation coating machine
Rainbow color evaporation coating machine
Inner coating evaporation coating machine
Laboratory/small size evaporation coating machine
Application field :
1) It can be widely used to do the decorative coating and function coating on the surface of plastic ,ceramic, glass , resin, candle and metal material .
2) high efficiency ,full automatic ,integrating the vacuum technology, evaporation coating and electromechanical integration technology together . Its an ideal equipment to do the high-grade decorative coating .
3) It can be widely used in Crafts, gifts, hardware appliances, accessories and electronics, machinery, light industry and other industries
Main feature:
1) Variety of structure: vertical type; horizontal type; single door type; double-door type.
2) Equipped with1-2 sets new model evaporation electrode, easy installation and discharge, convenient maintenance. Work rack flexible and reliable by public rotation of gear transmission structure.
3) Reasonable configuration for the vacuum system. High pumping speed, high efficiency, energy saving, full automatic process controller can be simple, reliable, beautiful.
Main Configuration:
(1) Variety structure: vertical type, horizontal type, single door, double-door, the vacuum chamber made by SUS 304 or high quality carbon steel. The vacuum chamber range from Φ600mm to Φ2200mm
(2) Vacuum system including: mechanical pump; diffusion pump, roots pump, diffusion pump with cooling trap, or adopts molecular pump that have the save energy, no pollution, no noise, high efficiency advantages.
3) Coating system adopts 1-2 sets new model structure Copper electrode resistance evaporation system & power
4) Auxiliary vacuum system uses Low temperature steam trap.
5) The electronic control system has the sound and light alarm device when circuits overload, it cutoff of gas or water.
6) the control system (touch screen +PLC ) can real-time display the detailed parameter ,the whole process can be full-automatic controlled ,automatic storage process parameters

2016年8月15日星期一

Optical coating equipment for film coating system

Optical coating equipment for film coating system
In the optical coating, it is often nothing more than a contact glass, optical aerospace industry for relatively scarce material through the optical film coating system to achieve the effect of a specific function which is the value of the film exists.
The film refractive index mainly to reduce or eliminate reflected light lenses, prisms and other optical surface, the optical element, in order toreduce light reflection loss element, in which a transparent dielectric film surface coating system, known as an anti-reflection or antireflection film, antireflection coating effect is closely related to the refractive index of the film thickness.
Transmittance and optical coating film refractive index-related, then the thickness of the film there is no relationship? In many complex optical systems, inhibition of the emitted light is very important, relatively speaking, the color of the emitted light more advanced optical system will be more and more, after the experiment, the film thickness to substantially affect light transmission is relatively small, if the thickness of the film something down, you will find the emitted light and reflected light a B exist nc * 2D optical path difference.
Optical coating machine such equipment is made of optical film coating tools in the course of several decades of development, realized at low temperature and high temperature coating system wavelength stabilization of high-quality film, the automated control system, simply adjust parameters, the entire coating process is completely grasp by machine, reducing the uncertainty.
A widely used system for all kinds of precision optical film coating, electrical membrane, such as laser mirrors, cold film, beam splitter, antireflective coatings, resin lenses, various filters, sun protection film, silicon and metal coating film optical coating machine.
A widely used in electronic products AR coating system protective film, bandpass filter, a dichroic mirror, to enhance the reflective film, laser mirrors, ITO film, a motor with a metal film, a polarization sub-prime and other electronic products optical coating machine.

2016年6月20日星期一

Phone Screen Antireflection Film Coating System Technology



Using the phone's color LCD anti-reflective protective film can reduce glare eye affected by external stimuli to enhance viewing comfort, and protect the eyes. The base of the phone is commonly used PC or acrylic substrate. Both the substrate as a color LCD screen protection, there are disadvantages of high reflectivity. Because without a coating of protective screen interface has a reflectivity of at least 4.2%, in bright light (such as sunlight) exposure, the intensity of the reflected light will seriously reduce the contrast of the display image. Therefore, such a surface coating on the protection panel antireflection film reflectance is less than 0.5%, will improve the clarity of the display.

In the protective screen surface were coated with magnetron sputtering (Vacuum c​oating) on a high refractive index and low refractive index films Ti02 Si02 film, the protective screen has a low reflection antireflection effect. Since the PC or acrylic substrate is an organic material, it should be in the range of deposition temperature of 30-35 ℃.

Coating process

(1) substrate -PMMA, PC.

(2) a two-story film system antireflection coating ten waterproof membrane. Membrane system.

(3) coating. Using continuous reaction magnetron sputtering deposition machine.

① Power: Si target IF power, Ti target with ten pulsed DC power supply.

② vacuum degree: access Ar, 02, a vacuum degree of 5*10-1Pa.

③ Temperature: 25-35 ℃

④ finally deposited waterproof membrane IAF3

2016年5月19日星期四

Influence of the vacuum chamber vacuum coating machine deformation caused

         
To minimize the impact of vacuum coating machine deformation caused by the vacuum chamber, we will guide screw, and other transmission parts fixed on a rigid intermediate layer between the bottom wall of the vacuum chamber with the use of point, line, surface-active support, to absorb and isolate the strain, and set the strain compensation adjustment mechanism, before the system is evacuated, with reference to the theoretical data preset FEM provide appropriate compensation amount, so as to achieve equilibrium under vacuum.

In order to verify the results of the finite element calculation of deformation and compensation of the vacuum chamber were tested. The first step, the indicator is positioned outside the four walls of the vacuum table installed base point, when the vacuum chambers evacuated by a vacuum atmosphere, record changes in the amount of each dial gauge, after normalization for the use of laser self collimator adjust deformation compensation.

By leveling the Autocollimator shines a laser through the glass window of the vacuum chamber is fixed on the table illuminated mirrors, adjusting deformation compensation adjustment mechanism in the atmosphere, so that the reflected light beam enters the field of view Autocollimator reception record two-dimensional angular deviation. Compensation amount is calculated by the finite element (or the first step in measuring) the vacuum state again adjust, obviously, at this time of the reflected beam collimator has been away since the field to receive, but once into the vacuum chamber, the reflected beam again since entering the field of view of the receiving collimator, the record in this case a two-dimensional angular deviation. Both before and after the two-dimensional display of the deviation angle basically.

Lubrication table movement and the environmental impact on the vacuum table scan is in frequent movement Vice vacuum chamber environment, except that instead of sliding to reduce rolling friction coefficient, but the rails, screw, etc. deputy campaign between taking good lubrication is to ensure the normal operation of the cutting apparatus necessary condition for a long time. Vacuum lubrication methods are usually plated solid lubricant film and direct use lubricant coating is easy to destroy the rail movement precision, and complex process. To this end, we tested a commodity market - MoS2 lubricant lubrication, the lubricant is sprayed directly in the sub-surface of the movement, with a quadrupole mass spectrometer and analyzed the lubricant is volatilized in a vacuum gas main component.

2016年5月11日星期三

Vacuum coating machines and dynamic magnetic field magnetron sputtering source

             
Motorized vacuum coating magnetic field magnetron sputtering vacuum coating sources, including the target substrate, solder or crimp ring is fixed in front of the target substrate sheet target, shielding ring, magnet board, within the magnet mounted on a magnet board and outside the magnet, the improvements made are: the diameter of the magnet is greater than the radius of the target substrate, and smaller than the diameter of the target, the target substrate magnet axis offset from the axis of the substrate, the substrate magnet fixed gear on a positive side, the coating machine ring gear meshing with the spur gear installed on the rack, the rear side of the installation located spur gear motor, motor power output shaft fixed to the frame turn handle, mounted on the gear shaft turn handle. Motor power output shaft and the ring gear coaxial with the target board settings.

The positive effect of this invention is: get a revolution and rotation of the annular magnetic field to scan to each target position, so that the target in a larger area to be etched shot off evenly. High target utilization, coating uniformity.

A moving magnetic field magnetron sputtering vacuum deposition coater, comprising a vacuum deposition chamber in front of the target substrate, welded or fixed to the sheet-shaped pressure ring positive target target substrate, covering the peripheral side surface of the target substrate and the target substrate positive target shielding material outside of the ring portion, an annular outer magnet disposed in combination target substrate on the back of the magnet substrate, the magnet is mounted on the center position of the magnet toward the substrate and the target substrate side circumferential position or arranged in rings outside the magnet,

Its features are: the diameter is larger than the radius of the target substrate magnet, and smaller than the diameter of the target, the target substrate magnet axis offset from the axis of the substrate, the substrate magnet fixed gear on a positive side, the installation and the coating machine frame ring spur gear, is mounted on the rear side of the spur gear rack located motor, the motor power output shaft fixed turn handle, mounted on the gear shaft turn handle.

2016年5月4日星期三

Movement of the gas particles in the coating process

   
  Core Tip: In the process of coating in vacuum coating equipment, all the time are inseparable from the motion of the particles, where the particles including electrons, atoms, molecules, ions, and when they collide will be issued.
  In the process of coating the vacuum coating equipment, all the time are inseparable from the motion of the particles, where the particles including electrons, atoms, molecules, ions, as will happen when they collide with each other in a variety of role for the gas particles often happens is that the ionization and excitation.
  For example, sputtering vacuum coating machine, argon ions are produced by colliding electrons and argon molecules. Before electrons collide with argon in a state of high-speed movement, argon molecule is a single atomic structure, electron and atomic inelastic collision, the electron kinetic energy brought to the atom, according to the law of conservation of energy, the electron kinetic energy reduction, atomic internal energy increased after atomic electrons gain energy from low energy level on the transition to the high energy level, stimulate atom, the ground state atoms become excited by the state, but this time is very short, can be said to be an instant thing, some can be maintained around 10-7 time.
  If the energy of the electron atoms get large enough, you can get rid of the shackles of the nucleus and become free electrons, atoms from electrons, neutrons and protons, electrons are negatively charged, uncharged neutrons, protons are positively charged atoms electronic charge number and the charge number of protons equal, the atoms are not charged, but become free electrons break free electrons leave the atom, the proton atom electron charge number greater than the number of charges, causing atoms into positively charged ions, the target and the power supply cathode phase, positively charged argon ions in the electric field, the acceleration motion to the cathode. When an atom of argon ions collide with the target on, some ion kinetic energy transferred to the atom, atom sputtered out, and another part of the ion and atom after the collision, the electron transfer to the atom on the argon ions, argon ion obtain negative electric charge equal to the number of electrons, reduction of argon atoms, metal atoms lose electrons to become metal positive ions, and get part of kinetic energy.
  This is the movement sputtering in argon particles by atoms become ions, and then by the ion into a atom process repeatedly.

2016年4月26日星期二

Metallization process - Surface Treatment

                 
Can be made into almost any kind of metal wire can be sputtering, metal spraying has many important applications, metallized decorative effect can be provided for the product.

Metallization technology has certain requirements:

Metallization process work must be pretreated substrate surface, the membrane material and the substrate metallization citation belongs mechanical bond, to get a good degree of mechanical bonding must be cleaned. Wire must be free of rust, grease-free, clean, standards-compliant. The substrate to be frosted.

Spraying construction environment metallization process should be higher than 5 degrees Celsius, if the air is humid, rain must be indoors. Spraying using thermal spraying method, the distance preferably 100-200mm, thermally sprayed belong manual operation, with respect to the vacuum coating apparatus by certain disadvantages for coating system.

When spraying, the spray gun should be perpendicular to the substrate, the angle of not less than 45 degrees, the maximum distance of not more than 200mm.

Spray coating thickness should grasp, generally after more than 0.1mm thickness to be layered deposition, the substrate temperature must not exceed 100 degrees Celsius, the moving speed of the gun should be uniform, 300-400mm / s better, spraying process can not hand touching sprayed surfaces.

Qualified metallized surfaces should be evenly without bubbles, no adhesion to the metal, you can use a magnifying glass to check the appearance, not only the appearance of quality to be qualified, but also qualified plating thickness, during an inspection if found to be defective should be re-fill plating .

Common metallization

Chrome: Chrome is a silvery white metal, a little bluish, there are five types, it is now widely used product modeling plating. There are chrome-plated guard, black chrome plating, hard chrome plating, porous chrome, white chrome.

Plated alloy: Alloy is required development of industrial production, some products require alloy properties, such as cobalt alloy, it looks pale pink, has strong corrosion resistance, plating out the effect of the system is very warm. For example tin alloy, corrosion resistance is better, a higher wear resistance and hardness, good polishing performance.

Silvered: a white light, high plasticity of the noble metal, silver having good conductive properties, can be improved conductivity performance of the product, it is fine silver metal, also commonly used for decoration.

2016年4月6日星期三

Major advantages of vacuum coating machine in plastic industry?


  Nowadays, “vacuum” has been widely used in various fields. It’s aimed to protect the products from the damage caused by impurity, and overcome the disadvange in normal environment. That’s the major reason why vacuum coating machine is applied in plastics industry.
  The plastic products are popularly used in people’s life with the advantage of easy forming, low cost, light quality, no corrosion; But its disadvanges, such as non-beauty, easy aging, poor mechnical performance, have restrained its expansion in application.
  This vacuum coating technology can metallise the plastic surface, and combine the orgnic material with inorgnic material.
The advantages of the vacuum coating machine’s application are as the following:

1.Easy cleaning, no absorbing dust

2.Electric conductivity in the plastic surface

3.More decorative function, making the surface more beautiful, smooth, colorful

4.Decrease the water absorbsion, improve heat resistance, not easy to deformation

5.Enhance the hardness and wear-resistanc

6.Imprive the characteristics of weather resistance. Usually, the plastics age quickly in the outdoor because of the ultraviolet radiation; But the coating aluminum film can reflect the UV strongly and improve the weather resistance.

2016年3月28日星期一

Vacuum evaporation coating machine the resistance of the coating


Vacuum coating technology is now a more environmental way of surface treatment, the coating way compared to the general chemical coating or plating is better. The adoption of modern vacuum technology, so this kind of coating relative to some other way of surface treatment is more superior, because to deal with things in the vacuum environment, vacuum evaporation coating machine now using this technology, can greatly reduce the external factors on the impact of items in the coating process.
 And with the continuous development of technology, currently use a coating, vacuum coating machine for objects to give the particle surface more membrane layer, thus formed the film also has higher wear resistance properties. The vacuum evaporation coating machine is a class of more traditional in the vacuum coating equipment. And this kind of coating machine is now also have a lot of kinds of types, including using resistance coating equipment, also known as resistance evaporation coating machine. This equipment is mainly used in the form of a resistance heating evaporation on the coating material, make the material attached on the surface of the items that need to coating, such as after the formation of a layer of film cooling. This is at present the basic resistance vacuum coating machine for use.

2016年3月22日星期二

Principle of rf sputtering coating machine

         
  Exterior burnish products, in fact, most of them are used the surface treatment, and said to the surface treatment, now of the coating is one of the typical type of surface treatment. And this kind of surface treatment of the main characteristic is that after coating makes the product's surface is covered with a layer of thin film and have the function of the isolated from the outside factors influence its surface. And the other is generally after coating, the surface has a certain iuster, for the products, improve the appeal. Now, use a lot of coating machinery, including the control sputtering coating machine, vacuum evaporation equipment, to introduce below the peak sputtering coating machine.
 Vacuum coating machine in a vacuum chamber, applying frequency to set two plates and in more than 50 kh high-frequency electric, is a small amount of electrons in the high frequency electric field in the high frequency electric field under the action of accelerating, collide with gas molecules, make gas ionization and emitted electron, the electronic and high frequency electric field will be accelerated, eventually forming the high frequency glow discharge. Radio frequency glow discharge of glow there is no difference between the two electrodes, each with a cathode dark space and negative hui district, plasma column between the two poles. Input coupling mode of high frequency power supply mode with capacitive coupling and inductance coupling, which is currently an internal principle of splash control sputtering coating machine, also because this principle makes the sputtering coating machine to use stability.

2016年3月14日星期一

Ion coating machine coating pretreatment process

               
  Working principle of ion coating machine is certain vacuum condition, by gas discharge, work or membrane material part of gas ionization, evaporation in the gas ion or material under the action of the bombardment of ions, the evaporation or reactants form a thin film deposited on the substrate surface. Ion coating machine coated in one of two ways, one is evaporation ion plating, the other is a sputtering ion plating. Evaporation is ion plating by heating membrane material, to produce metal steam, and then through different ways to motivate steam discharge, ionization deposited into a film. Sputtering ion plating is produced by high-energy ion sputtering film material on the surface of metal particles, then in gas ionization discharge space into a metal ion, the deposition film on the substrate. Vacuum ion plating for sedimentary hard film, widely used, such as cutting tools, wear-resistant parts surface.
Before with ion coating machine made plating film, is needs a sample test according to the needs of users, the following brief introduction:
1, first, and customer communication, to understand the performance and usage of samples;
2, analysis of samples, the performance, surface state, etc.;
3, choose before processing link;
4, depending on the type of surface shape, pollutants such as choosing pre cleaning;
5, test before treatment effect;
6, test samples, if qualified, compiling process, formally put into production.

What is evaporative vacuum coating machine works?

                       
  What is evaporative vacuum coating machine works? Vacuum coating equipment factory, said an evaporative vacuum coating machine running principle is indoor use vacuum resistance heating method, stick tightly on the resistance wire wire melting vaporization, the vaporization of metal molecules deposited on the substrate, and obtain smooth and reflectivity of film, achieve the goal of object surface decorates beautification.
  Get affordable plastic surface decoration ideal equipment, any color of plastic after vacuum coating can plated to gold, silver, red, purple, blue, grey, black, colorful and various colors, with improve product class, exterior more show showily.
 High-power evaporation system, silicon controlled rectifier control, high repeatability, stability, unique plating electrode design, good workpiece rotational structure, smooth rotation speed is adjustable, high yield and high yield.
 Evaporative vacuum coating machine is widely used in plastic, nylon, glass, ceramic, resin materials such as toys, decorations, crafts, following, electronic products, lighting accessories, cosmetic packaging and other industries.

2016年3月8日星期二

Why vacuum coating machine to clean?

                     
  Why vacuum coating machine to clean? Vacuum coating machine used for periodic cleaning of the after time is long, a lot of people will ask why? It is not often clean can appear what problem? Let's analyze.
  Used in vacuum coating machine prior to coating, coating materials for coating materials to do simple surface clean can prolong the service life of coating machine, because of various pollutants not only cannot obtain the required degree of vacuum, vacuum system can also affect the joint strength and sealing performance of vacuum components.
Common pollutant of vacuum coating machine are:
1. The oil include the processing, assembling and operating with the lubricant, cutting fluid, vacuum oil, etc.;
2. The operation time of hand sweat, blowing time of water vapor and saliva, etc. Acid, alkali, salt substance when cleaning the residual, hand sweat, mineral water, etc.; And polishing residue and environmental dust in the air and other organisms.
Cleaning is the purpose of these contaminants in order to improve the vacuum coating machine work stability, can make the job more smoothly.

2016年3月7日星期一

Vacuum coating equipment technology application what fields?

                       
  Vacuum coating equipment technology application what fields? Vacuum coating equipment factory, points out that with the development of technology of vacuum coating, vacuum coating machine, vacuum coating equipment technology application range is wider.
  Vacuum coating equipment used on construction and automobile glass vacuum plating equipment skills, plating coating a layer of TiO2 can make its anti-fog, dew and self-cleaning glass. This skill has excellent use on the automobile glass.
On the solar vacuum coating equipment, in order to be useful to use the sun's heat, it needs to use the vacuum plating equipment skills on plating a layer of special appearance.
  Vacuum coating equipment used in optical instruments: you know the optics microscope, camera, range finder, and articles for daily use at ordinary times in the mirrors, glasses, magnifying glass, etc., they cannot leave the vacuum plating equipment skills, made of plated film have reflective film, coating and absorbing film to wait for a few kinds.
Vacuum coating equipment used in the field of information storage, thin film materials as information recorded in the storage medium, has its unique advantages, magnetization rotation is very agile, parallel to the membrane surface state of bistable simple insist, etc.